Cadet Softheat EBHN500 Bedienungsanleitung PDF herunterladen

FOR EBHA SOFTHEAT BASEBOARD

If you are uncomfortable working with electrical appliances, unable to follow these guidelines,

or do not have the necessary equipment; consult a licensed electrician.

WARNING

Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock

or tag the panel board door to prevent someone from turning on power while you are working on

the heater. Failure to do so could result in serious electrical shock, burns, or possible death.

TEL: 360-693-2505 Fax: 360-694-8668 P.O. Box 1675 Vancouver, WA 98668-1675

IMPORTANT INSTRUCTIONS

Description

The EBKA-1-24 end cap thermostat kit is an accessory

for the EBHA Series of hydronic baseboard heaters.

This kit will provide thermostatic control of the heater

in place of a wall mounted thermostat.

Note: The EBKA-1-24 end cap thermostat can only

be installed on the left end of heater. It is designed

to control only one EBHA heater unit.

FIGURE 1: Thermostat kit assembly

Junction box cover

Tools Required: Phillips Screwdriver, Insulated Wire

Connectors (Wire Nuts

), Strain relief connector

EBKA SoftHeat Thermostat

INSTALLATION INSTRUCTIONS

SAVE THESE INSTRUCTIONS

EBHA Heater

EBKA

Thermostat

1 2

Inhaltsverzeichnis

Seite 1 - EBKA SoftHeat Thermostat

FOR EBHA SOFTHEAT BASEBOARDWARMERhotwaterelectricheatIf you are uncomfortable working with electrical appliances, unable to follow these guidelines,or

Seite 2 - Operation

Installation Instructions1. Remove the heater front panel by lifting up and pulling out on the bottom edge of the front panel.Set the front panel asid

Kommentare zu diesen Handbüchern

Keine Kommentare

Cadet Softheat EBHN500 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Cadet Softheat EBHN500 herunter. EBKA SoftHeat Thermostat Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Cadet Softheat EBHN500